P8 ECONOMIC 5A CURRENT MEASUREMENT 2500:1 CLAMP CT SENESOR
INTRODUCE
The P8 clamp ct sensor is an affordable & durable mini current clamp ct for measurements to 10A AC. This clamp ct sensor uses a special magnetic core to provide higher accuracy and lower phase shift 0.2°, current range 5A/10A/20A, ratio 2500:1, 2000:1 or 1000:1, frequency range from 40Hz to 2kHz. This ct sensor will read the magnitude of alternating current (AC) as well as the phase shift and waveform. The P8 Series AC current clamp ct sensor is a cheap and economic current clamp probe to be used in power and low level current measurement applications.
All of our clamp ct sensors are strictly comply IEC60044-1, IEC 61869-2, ANSI/IEEE C57.13, GB1208-2006, GB/T 20840.1-2010, GB/T 20840.2-2014, GB/T 22071.1-2018, IEC/EN61010-2-032, IEC/EN 61010-2-031.
FEATURES
Measurement range of 1mA to 20A AC; Min 1mA for leakage current measurement; Small, compact size; 40Hz to 2kHz response; Ratio 2500:1 or 2000:1, high precision 0.2%; Improved ergonomic design and easy operation; High content nickel metal core; Low phase shift for power measurement; 1mA/A AC output signals; Economic design; Designed to EN 61010, 600V CAT III safety standard; UL, CE CNAS mark; Jaw opening accommodates conductors up to 8mm diameter; Designed for DMMs, loggers, recorders and oscilloscopes;
APPLIATIONS
Phase angle meter;
Power load monitoring;
Power quality measuring;
Data logging/recording;
Measuring around cable bundles;
Waveform analysis;
Leakage current meter;
Energy meter calibrator;
Measuring in breaker panels;
CT secondary current detection;
HVAC;
Power meter;
Oscilloscopes;
Multimeter;
PARAMETERS
| Electrical parameters | |
|---|---|
| Ratio | 2500:1, 2000:1, 1000:1(customized) |
| Accuracy Class | 0.2%, 0.5% |
| Primary current | 0-1A AC, 0-5A AC, 0-10A AC |
| Signal output | 1mA/A, 0.5mA/A, 0.4mA/A, 1mV/A, 5mV/A, 10mV/A |
| Secondary voltage | 0-50mV, 0-100mV, 0-200mV, 0-1V, 0-2V AC (customized) |
| Secondary current | 0-2.5mA, 0-5mA, 0-10mA, 0-20mA AC (customized) |
| Max. Cont. Input current | 20A |
| Load capacity | ≤10Ω, standard 4Ω |
| Over voltage category | CAT III 600V |
| Frequency range | 40Hz-2KHz |
| Dielectric strength | 3KV 50Hz/60Hz at 1minute |
| Temperature range | -20°C to +55°C |
| Output | 2.5 meter cable with D01 or BNC connector |
| Max. voltage not insulated conductors | 720V |
| Standard | EN 61010-1, EN 61010-2-032, EN 61010-2-031 IEC60044-1, & IEC61869-2, 600V CAT III |
| Installation | Clamp type |
| Range | 1A, 5A, 10A optional |
| Output mode | Lead output(2.5m, 5m or customized) |
| Output signal | 333mV, 50mV, 1V, 2V AC at nominal input current |
| Connector | BNC, 4mm banana, signal cable(2 cores), Audio plug etc |
| Accuracy (20A Range) | |
| 0-10mA | ≤1% |
| 10mA-1A | ≤0.5% |
| 1A-20A | ≤0.5% |
| Phase Shift(20A Range) | |
| 0-10mA | ≤1° |
| 10mA-1A | ≤0.5° |
| 1A-20A | ≤0.2° |
| Mechanical parameters | |
| Dimensions (L x W x H) (mm) | 42 × 139 × 20 |
| Weight (g) | 180 |
| Holding wire diameter (mm) | φ8 |
| Max. jaw opening (mm) | 8 |
| Jaw color | Black |
| Material | PC+ABS+Polycarbonate, UL94 V0 |
SELECTION GUIDE
| Model | Rate Current | Max Current | Secondary Current | Coil Ratio | Burden Resistance | Accuracy |
|---|---|---|---|---|---|---|
| P8-5 | 5A | 6A | 2mA | 2500:1 | customized | 0.2% |
| P8-10 | 10A | 12A | 4mA | 2500:1 | customized | 0.2% |
| P8-20 | 20A | 24A | 8mA | 2500:1 | customized | 0.2% |
| P8-5-1 | 5A | 6A | 2.5mA | 2000:1 | customized | 0.2% |
| P8-10-1 | 10A | 12A | 5mA | 2000:1 | customized | 0.2% |
| P8-20-1 | 20A | 24A | 10mA | 2000:1 | customized | 0.2% |
| P8V1-5 | 5A | 6A | 50mV | 2000:1 | customized | 0.2% |
| P8V2-10 | 10A | 12A | 100mV | 2000:1 | customized | 0.2% |
| P8V3-20 | 20A | 24A | 200mV | 2000:1 | customized | 0.2% |
| P8V1-5-1 | 5A | 6A | 0.5V | 2000:1 | customized | 0.2% |
| P8V2-10-1 | 10A | 12A | 1V | 2000:1 | customized | 0.2% |
| P8V3-20-1 | 20A | 24A | 2V | 2000:1 | customized | 0.2% |
| Notes: Can be customized clamp on current transformers according to user requirements! | ||||||
CLAMP ON CURRENT TRANSFORMER SELECTION MODEL
| Model | Current Range | Max Current | Secondary Output Signal | Ratio | Resistance | Accuracy |
|---|---|---|---|---|---|---|
| S50 | 0-1200A | 1200A | 250mA, 500mA, 1A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 1000:1, 2000:1, 4000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| S120 | 0-3000A | 3600A | 250mA, 500mA, 1A, 2A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 600:1, 1000:1, 2000:1, 4000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| P8 | 0-10A | 20A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| P18 | 0-200A | 240A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| P50 | 0-1000A | 1200A | 250mA, 500mA, 1A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| P110 | 0-1500A | 1500A | 250mA, 500mA, 1A, 2A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 200:1, 600:1, 1000:1, 2000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| Q8A1 | 20A | 20A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| Q8A2 | 20A | 20A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| Q13 | 100A | 120A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| Q20A | 200A | 240A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| Q20B | 200A | 240A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| Q40 | 500A | 600A | 200mA, 250mA, 500mA, 333mV, 1V, 2V, 5V, 10V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| Q50A | 1000A | 1000A | 250mA, 500mA, 1A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| Q70 | 1000A | 1200A | 250mA, 500mA, 1A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 200:1, 600:1, 1000:1, 2000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| Q110 | 1500A | 1500A | 250mA, 500mA, 1A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 200:1, 600:1, 1000:1, 2000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| Q125 | 2000A | 2400A | 500mA, 1A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 200:1, 600:1, 1000:1, 2000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.2%, 0.5% |
| Q125B | 3000A | 3600A | 250mA, 500mA, 1A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 600:1, 1000:1, 2000:1, 4000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.2%, 0.5% |
| Q150 | 3000A | 3600A | 500mA, 1A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 600:1, 1000:1, 2000:1, 4000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.2%, 0.5% |
| XQ13 | 100A | 120A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| XQ20 | 200A | 240A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V, 10V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| HQ15 | 100A | 120A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
