S50 10A/100A/1000A 2MHz BANDWIDTH HIGH PRECISION 0.1% OSCILLOSCOPE CURRENT PROBE
INTRODUCE
The round jaw design on the S50 Series AC current probe along with the high content nickel metal core makes them well suited for power quality analysis and oscilloscope applications where high accuracy and low phase shift along with wide frequency are important from 10Hz to 2MHz. Measurement range is 1mA to 1200A. The S50 is a general purpose 1200A AC current clamp CT designed for use with DMMs or BNC connector, power loggers and energy meter calibration instruments that have a current input. It has a 1000:1 ratio and output of 1mA per amp or 1mV per amp measured in the jaw. The S50 clamp current probe has an integral 2.5m lead terminated. The rounded jaw design on this current clamp makes it well-suited for power applications where high accuracy 0.1% and low phase shift and wide frequency response are important.
All of our clamp on current transformers are strictly comply IEC60044-1, IEC 61869-2, ANSI/IEEE C57.13, GB1208-2006, GB/T 20840.1-2010, GB/T 20840.2-2014, GB/T 22071.1-2018, IEC/EN61010-2-032, IEC/EN 61010-2-031.
FEATURES
Measurement range of 1mA to 1200A AC; High precision 0.1% for current measurement; Improved ergonomic design & easy operation; High content permalloy core; Frequency 10Hz-10MHz bandwidth; Holding wire diameter: φ52mm; Conforms to EN 61010, 600V CAT III; Low phase shift for power measurement; Industrial design & beautiful appearance; With high time harmonic measurement; Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters; UL, CE CNAS mark; IEC/EN61010-2-032, IEC/EN 61010-2-031, IEC 61869-2 etc standard;
APPLIATIONS
Oscilloscope;
Multimeter;
Power quality analyzer(PQA);
Power and harmonic meters;
Phase angle meter;
Energy meter calibrator;
Measuring around cable bundles;
Power meter;
Power load monitoring;
Data logging/recording;
Cable fault analysis;
Large industrial loads;
Power quality monitoring;
CT secondary current detection;
Waveform analysis(oscilloscopes meter);
Earth resistance meter;
Energy sub-meters;
OUTLINE DRAWING
PARAMETERS
| Electrical parameters | |
|---|---|
| Ratio | 1000:1, 2000:1, 4000:1, 1000:5 (customized) |
| Accuracy Class | 0.1%, 0.2%, 0.5% |
| Primary current | 0-1000A AC, 0-500A AC, 0-100A AC |
| Signal output | 1mA/A, 1mV/A, 10mV/A, 100mV/A |
| Secondary voltage | 0-0.5V AC and 0-1V AC; |
| Secondary current | 0-1A or 0-5A AC |
| Max. Cont. Input current | 1200A |
| Load capacity | ≤20Ω, standard 4Ω |
| Over voltage category | CAT III 600V |
| Frequency range | 10Hz-2MHz |
| Dielectric strength | 3KV 50Hz/60Hz at 1minute |
| Temperature range | -40°C to +55°C |
| Output | 2.5 meter cable with D01 or BNC connector |
| Max. voltage not insulated conductors | 720 V |
| Standard | EN 61010-1, EN 61010-2-032, EN 61010-2-031 IEC60044-1, & IEC61869-2, 600V CAT III |
| Installation | Clamp type |
| Range | 10A, 100A, 1000A optional |
| Output mode | Lead output(2.5m) |
| Connector | BNC, 4mm banana, signal cable(2 cores), customized |
| Accuracy (1000A Range) | |
| 0-10A | ≤0.5% |
| 10-100A | ≤0.2% |
| 100-1200A | ≤0.1% |
| Phase Shift(1000A Range) | |
| 0-10A | ≤0.5° |
| 10-100A | ≤0.2° |
| 100-1200A | ≤0.1° |
| Mechanical parameters | |
| Dimensions (L x W x H) (mm) | 105 x 218 x 30 |
| Weight (g) | 650 |
| Holding wire diameter (mm) | φ52 |
| Max. jaw opening (mm) | 52 |
| Jaw color | Red & Grey |
| Material | PC+ABS, UL94 V0 |
SELECTION GUIDE
| Model | Rate Current | Max Current | Secondary Current | Coil Ratio | Burden Resistance | Accuracy |
|---|---|---|---|---|---|---|
| S50A5-100 | 100A | 120A | 5A | 20:1 | 2.5VA | 1% |
| S50A5-200 | 200A | 240A | 5A | 40:1 | 2.5VA | 0.5% |
| S50A5-300 | 300A | 360A | 5A | 60:1 | 2.5VA | 0.5% |
| S50A5-400 | 480A | 360A | 5A | 80:1 | 2.5VA | 0.5% |
| S50A5-500 | 500A | 600A | 5A | 100:1 | 2.5VA | 0.5% |
| S50A5-600 | 600A | 720A | 5A | 120:1 | 2.5VA | 0.5% |
| S50A5-800 | 800A | 960A | 5A | 160:1 | 2.5VA | 0.5% |
| S50A5-1000 | 1200A | 960A | 5A | 200:1 | 2.5VA | 0.5% |
| S50A1-100 | 100A | 120A | 1A | 100:1 | customized | 0.2% |
| S50A1-200 | 200A | 240A | 1A | 200:1 | customized | 0.2% |
| S50A1-300 | 300A | 360A | 1A | 300:1 | customized | 0.2% |
| S50A1-400 | 400A | 480A | 1A | 400:1 | customized | 0.2% |
| S50A1-500 | 500A | 600A | 1A | 500:1 | customized | 0.2% |
| S50A1-600 | 600A | 720A | 1A | 600:1 | customized | 0.2% |
| S50A1-800 | 800A | 960A | 1A | 800:1 | customized | 0.2% |
| S50A1-1000 | 1000A | 1200A | 1A | 1000:1 | customized | 0.1% |
| S502-300 | 300A | 360A | 300mA | 1000:1 | customized | 0.1% |
| S502-500 | 500A | 600A | 500mA | 1000:1 | customized | 0.1% |
| S502-1000 | 1000A | 1200A | 500mA | 2000:1 | customized | 0.1% |
| S503-800 | 800A | 960A | 400mA | 2000:1 | customized | 0.1% |
| S503-1000 | 1000A | 1200A | 400mA | 2500:1 | customized | 0.1% |
| S504-500 | 500A | 600A | 250mA | 2000:1 | customized | 0.1% |
| S504-1000 | 1000A | 1200A | 250mA | 4000:1 | customized | 0.1% |
| S50V1-1000 | 1000A | 1200A | 1V | 1000:1 | customized | 0.1% |
| S50V2-1000 | 1000A | 1200A | 2V | 1000:1 | customized | 0.1% |
| S50V4-1000 | 1000A | 1200A | 4V | 1000:1 | customized | 0.1% |
| S50V5-1000 | 1000A | 1200A | 5V | 1000:1 | customized | 0.1% |
| S50V10-1000 | 1000A | 1200A | 10V | 1000:1 | customized | 0.1% |
| S50V03-300 | 300A | 360A | 300mV | 1000:1 | customized | 0.2% |
| S50V05-500 | 500A | 600A | 500mV | 1000:1 | customized | 0.2% |
| S50V1-500 | 500A | 600A | 1V | 2000:1 | customized | 0.2% |
| S50V2-500 | 500A | 600A | 2V | 2000:1 | customized | 0.2% |
| S50V4-500 | 500A | 600A | 4V | 2000:1 | customized | 0.2% |
| S50V5-500 | 500A | 600A | 5V | 2000:1 | customized | 0.2% |
| S50V10-500 | 500A | 600A | 10V | 2000:1 | customized | 0.2% |
| S50V13-1000 | 10/100/1000A | 12/120/1200A | 1V | 1000:1 | customized | 0.1% |
| Notes: Can be customized clamp on current transformers according to user requirements! | ||||||
CLAMP ON CURRENT TRANSFORMER SELECTION MODEL
| Model | Current Range | Max Current | Secondary Output Signal | Ratio | Resistance | Accuracy |
|---|---|---|---|---|---|---|
| S50 | 0-1200A | 1200A | 250mA, 500mA, 1A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 1000:1, 2000:1, 4000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| S120 | 0-3000A | 3600A | 250mA, 500mA, 1A, 2A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 600:1, 1000:1, 2000:1, 4000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| P8 | 0-10A | 20A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| P18 | 0-200A | 240A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| P50 | 0-1000A | 1200A | 250mA, 500mA, 1A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| P110 | 0-1500A | 1500A | 250mA, 500mA, 1A, 2A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 200:1, 600:1, 1000:1, 2000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| Q8A1 | 20A | 20A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| Q8A2 | 20A | 20A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| Q13 | 100A | 120A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| Q20A | 200A | 240A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| Q20B | 200A | 240A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| Q40 | 500A | 600A | 200mA, 250mA, 500mA, 333mV, 1V, 2V, 5V, 10V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| Q50A | 1000A | 1000A | 250mA, 500mA, 1A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| Q70 | 1000A | 1200A | 250mA, 500mA, 1A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 200:1, 600:1, 1000:1, 2000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| Q110 | 1500A | 1500A | 250mA, 500mA, 1A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 200:1, 600:1, 1000:1, 2000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| Q125 | 2000A | 2400A | 500mA, 1A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 200:1, 600:1, 1000:1, 2000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.2%, 0.5% |
| Q125B | 3000A | 3600A | 250mA, 500mA, 1A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 600:1, 1000:1, 2000:1, 4000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.2%, 0.5% |
| Q150 | 3000A | 3600A | 500mA, 1A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 600:1, 1000:1, 2000:1, 4000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.2%, 0.5% |
| XQ13 | 100A | 120A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| XQ20 | 200A | 240A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V, 10V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
| HQ15 | 100A | 120A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
