FU-36 5A-600A CE UL LOW LOST CLIP-ON SPLIT CORE CURRENT SENSOR
INTRODUCE
FU-36 clip-on ct is low cost ac split core current sensor, measuring AC current from 5A to 600 Amps passing through the center conductor. This model has four diameter version (10mm, 16mm, 24mm and 36mm), suite for all kinds of customers application. Split core current sensors are designed for fast and easy installation. The split core design permits non-contact current measurements through magnetic field induction without requiring that the primary wire be taken offline and disconnected for CT installation. This method permits a safer, easy and portable current measurement.
All of our clip-on current sensors are strictly comply IEC60044-1, IEC61869-2, ANSI/IEEE C57.13, NTC 2205, GB1208-2006, GB/T 20840.1-2010, GB/T 20840.2-2014, GB/T 22071.1-2018.
FEATURES
Measurement range of 1mA to 600A AC; Low phase shift for power measurement; Holding wire diameter: φ10mm, φ16mm, φ24mm, φ36mm; Using high magnetic silicon steel, good linearity and high sensitivity; Output model: lead output(2m)-can be customized; Isolated plastic case recognized according to UL94-V0; Small-size, compact size, light-weight; Most cost-effective; Faster installation; Safe and easy installation to distribution panels; High accuracy 0.5%, 1%; Over-Voltage protection circuit is installed; CE, UL/EN 61010-1 certified;
APPLIATIONS
HEMS(home energy management system); BEMS(building energy management system); Various power monitoring systems; Sub-Metering accurate measurement; Smart grid application features; Three phase balance control; Load center; Power meter and harmonic meters; Energy meter(kWh meter); Digital fault recorders; Power quality analyzer meter; Distribution boxes; Energy meter current measurement; In-Factory display In-Home display; Inverters for solar & wind turbine systems; Power measurement device for PLC; Data loggers to analyze building & machinery performance;
WIRING DIAGRAMS
P1, P2 is primary polarity terminal, S1, S2 is secondary polarity terminal.
P2, S2 is homonymous terminals (subtractive polarity).
PARAMETERS
| Electrical parameters | |
|---|---|
| Standards | IEC60044-1; IEC 61869-2; NTC 2205; ANSI/IEEE C57.13; GB1208-2006; GB/T 20840.1-2010; GB/T 20840.2-2014; GB/T 22071.1-2018 |
| Ratio | 1000:1, 2000:1, 2500:1 or 3000:1, customized |
| Accuracy | 0.2%, 0.5%, 1% |
| Range of primary rated current | 5A/10A/20A/30A/40A/50A/60A/75A/80A/100A/150A/200A/250A/300A/400A/500A/600A |
| Range of rated burden | 1VA-5VA |
| Rated frequency | 50/60Hz |
| Rated secondary output | 5mA-200mA, 1A, 5A AC optional 333mV AC or 100mV-2V optional |
| Frequency range | 40Hz-2KHz |
| System voltage | 720V(0.72kV) |
| Rated continuous thermal current | 120%I1n continuously |
| Secondary winding power frequency withstand voltage(Dielectric strength) | 2.5KV 50Hz/60Hz at 1 minute |
| Safety | CAT IV 600V IEC/EN 61010-1 |
| Output | K1, K2 or S1, S2; Standard 2 meter cable |
| Protection level | 3.0V0-P |
| Internal structure | Snap-fit Design |
| Installation and fixation method | Ribbon |
| Material | Silicon steel sheets+enameled wire+ABS+94V-0 |
| Mechanical parameters | |
| Dimensions (W×D×H) (mm) | 26 × 43 × 27; 31 × 50 × 30; 43 ×73 × 39; 60 × 89 × 43 |
| Jaw cable diameter(mm) | 10mm, 16mm, 24mm, 36mm |
| Weight (kg) | 100, 120, 200, 350 |
| Color | Black |
| Working conditions | |
| Operating temperature | -25°C to +55°C |
| Storage temperature | -40°C to +70°C |
| Environment | Indoors |
| Altitude | <3000 meters |
| Conditions | No existence of severely begrimed, erosive and radioactive gas in the air. Permission of long-term operation under rated current. |
TECHNICAL DATA
| Type | FU-36 | ||
|---|---|---|---|
| Purpose | Measuring current transformer | ||
| Ratio | Accuracy class | ||
| I1/I2 | 0.2 | 0.5 | 1 |
| 5A/333mV | YES | YES | YES |
| 10A/333mV | YES | YES | YES |
| 20A/333mV | YES | YES | YES |
| 50A/333mV | YES | YES | YES |
| 60A/333mV | YES | YES | YES |
| 100A/333mV | YES | YES | YES |
| 150A/333mV | YES | YES | YES |
| 200A/333mV | YES | YES | YES |
| 300A/333mV | YES | YES | YES |
| 400A/333mV | YES | YES | YES |
| 500A/333mV | YES | YES | YES |
| 600A/333mV | YES | YES | YES |
| 5A/2.5mA | YES | YES | YES |
| 10A/5mA | YES | YES | YES |
| 20A/10mA | YES | YES | YES |
| 50A/25mA | YES | YES | YES |
| 60A/30mA | YES | YES | YES |
| 100A/50mA | YES | YES | YES |
| 150A/75mA | YES | YES | YES |
| 200A/100mA | YES | YES | YES |
| 50A/50mA | YES | YES | YES |
| 60A/60mA | YES | YES | YES |
| 100A/100mA | YES | YES | YES |
| 150A/150mA | YES | YES | YES |
| 200A/200mA | YES | YES | YES |
| 100A/100mV | YES | YES | YES |
| 100A/1V | YES | YES | YES |
| 100A/2V | YES | YES | YES |
| 100A/5V | YES | YES | YES |
| 100A/10V | YES | YES | YES |
| 200A/1V | YES | YES | YES |
| 200A/2V | YES | YES | YES |
| 200A/5V | YES | YES | YES |
| 200A/10V | YES | YES | YES |
| 100A/1A | YES | YES | YES |
| 200A/1A | YES | YES | YES |
| 300A/1A | YES | YES | YES |
| 400A/1A | YES | YES | YES |
| 500A/1A | YES | YES | YES |
| 600A/1A | YES | YES | YES |
| 200A/5A | YES | YES | YES |
| 300A/5A | YES | YES | YES |
| 400A/5A | YES | YES | YES |
| 500A/5A | YES | YES | YES |
| 600A/5A | YES | YES | YES |
SELECTION GUIDE
| Model | Primary rated current | Rated load | Secondary output | Aperture (mm) | Description (mm) | Weight (kg) |
|---|---|---|---|---|---|---|
| FU-16 | 5-200A | ≤10Ohm | 333mV,1V, 5V,100mA | φ16 | 38 x 55 x 18 | 0.06 |
| FU-32 | 100-600A | ≤10VA | 333mV,1V, 5V, 1A, 5A | φ32 | 110 x 130 x 41 | 0.7 |
| FU-36 | 100-600A | ≤2.5VA | 333mV,1V, 5V, 1A, 5A | φ10, φ16, φ24, φ36 | 26 × 43 × 27 31 × 50 × 30 43 ×73 × 39 60 × 89 × 43 |
0.1, 0.12, 0.2, 0.35 |
| FU-80 | 100-1200A | ≤5VA | 333mV,1V, 5V, 1A, 5A | φ30, φ55, φ80 | 88 x 129 x 28 108 x 155 x 28 138 x 193 x 28 |
0.4, 0.55, 0.6 |
| FU-100 | 300-3000A | ≤10VA | 333mV,1V, 5V, 1A, 5A | φ100 | 170 x 184.5 x 41 | 1 |
| FU120 | 200-4000A | ≤10VA | 333mV,1V, 5V, 1A, 5A | 120 x 130, 120 x 30 | 166 x 110 x 49 166 x 208 x 49 |
1.2, 1.7 |
| FU160 | 500-5000A | ≤20VA | 333mV,1V, 2V, 5V,1A, 5A | 160 x 80, 120 x 80 | 144 x 227 x 54 | 2.8, 2.3 |
ORDERING INFORMATION
Be sure to the type, current ratio, accuracy class, rated load and use of the products when you plan to make a order. Special specifications could be customized. All kinds of different specifications and parameters current transformers can be made according to your needs.
