The HQ15 100A clamp on current probe is designed for easy installed in tight spaces and without the need for dismantling the primary busbar or cables. The sensing head uses sliding push-fit clamp structure, safety isolation to avoid the user to contact with charged objects directly. It complies with CE standards and meets 300V CAT III safety class. This model HQ15 split core current probe is a high accuracy mini current clamp probe for measurements up to 130A AC. This current probe uses a special magnetic core to provide higher accuracy and lower phase shift. The HQ15 series AC current probe is an excellent probe sensor to be used in power and low level current measurement applications.
All of our clamp-on current probe are strictly comply IEC/EN61010-2-032, IEC/EN 61010-2-031, IEC60044-1, IEC 61869-2, ANSI/IEEE C57.13, GB1208-2006, GB/T 20840.1-2010, GB/T 20840.2-2014, GB/T 22071.1-2018.
Measurement range of 1mA to 130A AC; High precision 0.1% for current measurement; Suitable for 5A, 10A, 20A, 50A, 100A cable online measurement; IEC/EN61010-2-032, IEC/EN 61010-2-031, IEC 61869-2 etc standard; 10Hz to 5kHz response; 1mA/A, 1mV/A or 10mV/A AC output signals; Low phase shift for power measurement; High time harmonics measurement; Improved ergonomic design and easy operation; High content nickel metal core; Small, compact size; Easy & quick installation in tight spaces; Excellent linearity; Holding wire diameter: φ15mm; Installation: clamp type design; Designed for DMMs, recorders, oscilloscopes, power & harmonic meters; Designed to EN 61010, 600V CAT III safety standard; UL, CE, CNAS mark; As a high accuracy clamp-on current probe; Can be customized 4mm banana/BNC connector;
Energy meter calibrator;
Power and harmonic meters;
Power meter;
Electricity energy meter;
Power quality analyzer(PQA);
Phase angle meter;
Power quality monitoring;
Power load monitoring;
Data logging/recording;
CT secondary current detection;
Waveform analysis;
Multimeter;
Oscilloscopes meter;
Energy sub-meters;
Electrical parameters | |
---|---|
Ratio | 1000:1, 2000:1, 2500:1 (customized) |
Accuracy Class | 0.1%, 0.2% |
Primary current | 0-5A AC, 0-100A AC |
Signal output | 1mA/A, 1mV/A, 5mV/A, 10mV/A |
Secondary voltage | 0-50mV, 0-100mV, 0-200mV, 0-1V, 0-5V AC (customized) |
Secondary current | 0-2.5mA, 0-5mA, 0-10mA, 0-100mA AC (customized) |
Max. Cont. Input current | 50A, 130A |
Load capacity | ≤20Ω, standard 4Ω |
Over voltage category | CAT III 600V |
Frequency range | 10Hz-5kHz |
Dielectric strength | 3KV 50Hz/60Hz at 1minute |
Temperature range | -20°C to +55°C |
Output | 2.5 meter cable with D01 or BNC connector |
Max. voltage not insulated conductors | 720 V |
Standard | EN 61010-1, EN 61010-2-032, EN 61010-2-031 IEC60044-1, & IEC61869-2, 600V CAT III |
Installation | Clamp type |
Range | 5A, 100A optional |
Output mode | Lead output(2.5m, 5m, 10m or customized) |
Output signal | 333mV, 50mV, 1V, 2V, 5V AC at nominal input current |
Connector | BNC, 4mm banana, signal cable(2 cores), Audio plug, customized |
Accuracy (5A/100A Range) | |
0-100mA | ≤0.5% |
100mA-1A | ≤0.2% |
1A-130A | ≤0.1% |
Phase Shift(5A/100A Range) | |
0-100mA | ≤0.5° |
100mA-10A | ≤0.2° |
10A-130A | ≤0.1° |
Mechanical parameters | |
Dimensions (L x W x H) (mm) | 45 x 160 x 25 |
Weight (g) | 300 |
Holding wire diameter (mm) | φ15 |
Max. jaw opening (mm) | 15 |
Jaw color | Black |
Material | PC+ABS+Polycarbonate, UL94 V0 |
Model | Rate Current | Max Current | Secondary Current | Coil Ratio | Burden Resistance | Accuracy |
---|---|---|---|---|---|---|
HQ15V-5 | 5A | 50A | 50mV | 2000:1 | customized | 0.1% |
HQ15V-10 | 10A | 50A | 100mV | 2000:1 | customized | 0.1% |
HQ15V-20 | 20A | 50A | 200mV | 2000:1 | customized | 0.1% |
HQ15V-100 | 100A | 130A | 1V | 2000:1 | customized | 0.1% |
HQ15V1-100 | 100A | 130A | 100mV | 2000:1 | customized | 0.1% |
HQ15V2-100 | 100A | 130A | 2V | 2000:1 | customized | 0.1% |
HQ15V3-100 | 100A | 130A | 5V | 2000:1 | customized | 0.1% |
HQ15A-5 | 5A | 6A | 2.5mA | 2000:1 | customized | 0.1% |
HQ15A-10 | 10A | 12A | 5mA | 2000:1 | customized | 0.1% |
HQ15A-20 | 20A | 24A | 10mA | 2000:1 | customized | 0.1% |
HQ15A-100 | 100A | 130A | 50mA | 2000:1 | customized | 0.1% |
HQ15A1-5 | 5A | 6A | 5mA | 1000:1 | customized | 0.1% |
HQ15A1-10 | 10A | 12A | 10mA | 1000:1 | customized | 0.1% |
HQ15A1-20 | 20A | 24A | 20mA | 1000:1 | customized | 0.1% |
HQ15A1-100 | 100A | 130A | 100mA | 1000:1 | customized | 0.1% |
HQ15A2-100 | 100A | 130A | 40mA | 2500:1 | customized | 0.1% |
Notes: Can be customized clamp on current transformers according to user requirements! |
Model | Current Range | Max Current | Secondary Output Signal | Ratio | Resistance | Accuracy |
---|---|---|---|---|---|---|
S50 | 0-1200A | 1200A | 250mA, 500mA, 1A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 1000:1, 2000:1, 4000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
S120 | 0-3000A | 3600A | 250mA, 500mA, 1A, 2A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 600:1, 1000:1, 2000:1, 4000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
P8 | 0-10A | 20A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
P18 | 0-200A | 240A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
P50 | 0-1000A | 1200A | 250mA, 500mA, 1A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
P110 | 0-1500A | 1500A | 250mA, 500mA, 1A, 2A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 200:1, 600:1, 1000:1, 2000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
Q8A1 | 20A | 20A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
Q8A2 | 20A | 20A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
Q13 | 100A | 120A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
Q20A | 200A | 240A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
Q20B | 200A | 240A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
Q40 | 500A | 600A | 200mA, 250mA, 500mA, 333mV, 1V, 2V, 5V, 10V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
Q50A | 1000A | 1000A | 250mA, 500mA, 1A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
Q70 | 1000A | 1200A | 250mA, 500mA, 1A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 200:1, 600:1, 1000:1, 2000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
Q110 | 1500A | 1500A | 250mA, 500mA, 1A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 200:1, 600:1, 1000:1, 2000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
Q125 | 2000A | 2400A | 500mA, 1A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 200:1, 600:1, 1000:1, 2000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.2%, 0.5% |
Q125B | 3000A | 3600A | 250mA, 500mA, 1A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 600:1, 1000:1, 2000:1, 4000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.2%, 0.5% |
Q150 | 3000A | 3600A | 500mA, 1A, 5A, 333mV, 1V, 2V, 5V, 10V etc | 600:1, 1000:1, 2000:1, 4000:1 etc | 2.5VA, 1VA, 4Ω, 10Ω, 20Ω etc | 0.2%, 0.5% |
XQ13 | 100A | 120A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
XQ20 | 200A | 240A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V, 10V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |
HQ15 | 100A | 120A | 2mA, 2.5mA, 5mA, 10mA, 20mA, 333mV, 1V, 2V, 5V etc | 1000:1, 2000:1, 2500:1, 4000:1 etc | 4Ω, 10Ω, 20Ω etc | 0.1%, 0.2%, 0.5% |